Royal Enfield Classic 350 Trials Works Replica (2019) technical specifications

Royal Enfield Classic 350 Trials Works Replica is produced in 2019. Engine is Four Stroke, single cylinder, OHV, SI Engine, Twinspark, displacement 346 cc / 21.1 cu-in , produces power 19.8 hp / 15.3 kW @ 5250 rpm and 28 Nm / 15.4 lb-ft @ 4000 rpm. Royal Enfield Classic 350 Trials Works Replica wet weight is 187 kg / 412.3 lbs. Royal Enfield Classic 350 Trials Works Replica has 6 photos.

Technical specifications

+ Add to 'Compare list'

Model:	Classic 350 Trials Works Replica
Years:	2019
Engine:	Four Stroke, single cylinder, OHV, SI Engine, Twinspark
Capacity:	346 cc / 21.1 cu-in
Bore x Stroke:	70 x 90mm
Cooling System:	Air Cooled
Compression Ratio:	8.5:1
Exhaust:	One-into-one
Induction:	BS29 / UCAL
Ignition:	Digital TCI
Starting:	Electric & Kick
Max Power:	19.8 hp / 15.3 kW @ 5250 rpm
Max Torque:	28 Nm / 15.4 lb-ft @ 4000 rpm
Clutch:	Wet, multiplate
Transmission:	5 Speed, constant mesh
Final Drive:	Chain
Frame:	Single Down Tube, using engine as stressed member
Front Suspension:	35mm Hydraulic telescopic forks
Front Wheel Travel:	130 mm / 5.1 in
Rear Suspension:	Twin shocks, gas charged with 5-step adjustable preload
Rear Wheel Travel:	80 mm / 3.1 in
Front Brakes:	Single 280mm disc, 2 piston caliper, ABS
Rear Brakes:	240 mm disk, 1 piston floating caliper, ABS
Front Tyre:	90/90-19 - 52 P
Rear Tyre:	110/80-18 - 62 P
Dimensions:	Length: 2080 mm / 81.9 in Width: 805 mm / 31.7 in Height: 1123 mm / 44.2 in
Wheelbase:	1390 mm / 54.7 in
Ground Clearance:	135 mm / 5.3 in
Seat Height:	800 mm / 31.5 in
Wet Weight:	187 kg / 412.3 lbs
Fuel Capacity:	13.5 Litres / 29.7 US gal