Ducati 250 Mark 3D Desmo (1968-69) technical specifications
Ducati 250 Mark 3D Desmo is produced in 1968-69. Engine is Four stroke, single cylinder, Desmo SOHC, bevel gear driven, displacement 248.6 cc / 15.2 cu in , produces power 16.4 kW / 22 hp @ 7500 rpm. Ducati 250 Mark 3D Desmo top speed is 150 km/h / 93 mph. Ducati 250 Mark 3D Desmo weighs 127 kg / 280 lbs. Ducati 250 Mark 3D Desmo has 1 photos.
Technical specifications
+ Add to 'Compare list'Model: | 250 Mark 3D Desmo |
Years: | 1968-69 |
Engine: | Four stroke, single cylinder, Desmo SOHC, bevel gear driven |
Capacity: | 248.6 cc / 15.2 cu in |
Bore x Stroke: | 74 x 57.8 mm |
Compression Ratio: | 10.0:1 |
Cooling System: | Air cooled |
Induction: | Dell'Orto SS1 29D carburetor |
Ignition: | Coil, 6V 30W generator (later 6V 70 W) |
Battery: | SAFA 3L3 13.5 Ah |
Spark Plug: | Marelli CW260N / Lodge 2HN |
Starting: | Kick |
Max Power: | 16.4 kW / 22 hp @ 7500 rpm |
Primary Drive Ratio: | 2.500:1 |
Transmission: | 5 Speed |
Gear Ratios: | 1st 2.46 / 2nd 1.73 / 3rd 1.35 / 4th 1.10 / 5th 0.97:1 |
Final Drive: | Chain |
Final Drive Ratio: | 2.812:1 |
Front Suspension: | Hydraulic fork, Ducati 31.5 mm |
Rear Suspension: | Swingarm, Marzocchi dual shocks, 3-way adjustable |
Front Brakes: | 180mm Drum |
Rear Brakes: | 160mm Drum |
Front Tyre: | 2.75-18 |
Rear Tyre: | 3.00-18 |
Dimensions: | Length: 2000 mm / 78.7 in Width: 600 mm / 23.6 in Height: 940 mm / 37.0 in |
Wheelbase: | 1360 mm / 53.5 in |
Seat Height: | 735 mm / 28.9 in |
Dry Weight: | 127 kg / 280 lbs |
Fuel Capacity: | 13 L / 3.4 US gal / 2.9 Imp gal |
Standing ¼ Mile: | 18.9 sec |
Top Speed: | 150 km/h / 93 mph |
Back to Ducati motorcycles