BRP Cam-Am BRP Can Am Spyder RT Roadster Limited (2012-13) vs Mash RoadStar 400 (2016-)
Comparison technical specifications
![]() Add bike |
![]() Remove bike |
![]() Remove bike |
Make: | BRP Cam-Am | Mash |
Model: | BRP Can Am Spyder RT Roadster Limited | RoadStar 400 |
Years: | 2012-13 | 2016- |
Engine: | BRP-Rotax, Four stroke, V-Twin, DPHC, 4 valve per cylinder | Four strike, single cylinder, SOHC, 4 valves |
Capacity: | 998 cc / 61 cu-in | 397 cc / 24.2 cu in |
Bore x Stroke: | 97 x 68 mm | 85 x 70 mm |
Cooling System: | Liquid cooled | Air cooled |
Compression Ratio: | 10.8:1 | 8.8:1 |
Induction: | Multi-point EFI with 57 mm diameter throttle bodies | Siemens 2.0 EFI |
Ignition: | Electronic ignition with dual output coil | Digital electronic |
Starting: | Electric | Electric |
Exhaust: | 2-into-1 with catalytic converter | Two-into-one |
Max Power: | 106 hp / 79 kW @ 8500 rpm | 21.6 kW / 29 hp @ 7000 rpm |
Max Torque: | 77 lb-ft / 104.3 Nm @ 6250 rpm | 30 Nm / 3.06 kgf-m / 22.1 ft-lb @ 5500 rpm |
Clutch: | Wet, multi-plate, manual or electronic operation through a hydraulic piston | Wet, multi-plate |
Transmission: | Sequential Manual 5-Speed (SM5) with transmission-based reverse | 5-Speed |
Final Drive: | Belt | Chain |
Front Suspension: | Double A-Arm with anti-roll bar, .5.67 in 144 mm front suspension travel. with adjustable cam | 35 mm Hydraulic fork, adjustable |
Rear Suspension: | Swing-arm with monoshock, 5.71 in 145 mm with adjustable cam rear suspension travel. | Dual-shock, adjustable preload |
Front Brakes: | 260mm discs 4 piston caliper | Single 280 mm disc, 2 piston caliper |
Rear Brakes: | Single 260mm disc 2 piston caliper | Drum |
Front Tyre: | 2x 165/65R14 | 90/90-19 |
Rear Tyre: | 225/50R15 | 130/70-18 |
Seat Height: | 737 mm / 29 in | 780 mm / 30.7 in |
Dry Weight: | .421 kg / 929 lbs | 151 kg / 333 lbs |
Fuel Capacity: | 25 Litres / 6.6 us gal | 13 Litres / 3.4 US gal / 2.9 Imp gal |