Honda Monkey 125 ABS (2018-19) vs Beta RR 250 Enduro (2007-10) vs Yamaha YZF 600 R6 (2011)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Honda | Beta | Yamaha |
| Model: | Monkey 125 ABS | RR 250 Enduro | YZF 600 R6 |
| Years: | 2018-19 | 2007-10 | 2011 |
| Engine: | Four stroke, single cylinder, SOHC, 2 valve | Four stroke, single cylinder, DOHC, 4 valves | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. |
| Capacity: | 124.9 cc / 7.62 cu-in | 250 cc / 15.3 cu in | 599 cc / 36.5 cu-in |
| Bore x Stroke: | 52.4 x 57.9 mm | 75 x 56.5 mm | 67 x 42.5 mm |
| Compression Ratio: | 9.3:1 | 12.0:1 | 13.1;1 |
| Cooling System: | Aircooled | Air cooled | Liquid cooled |
| Induction: | PGMFI electronic fuel injection | Keihin FCR-MX 37 carburetor | 41 mm Mikuni throttle body F.I. |
| Ignition: | Electronic CDI | DC-CDI without trembler with variable ignition timing, Kokusan type | TCI |
| Starting: | Electric | Electric and kick start | Electric |
| Clutch: | Wet multiplate | Wet, multiplate | Wet, slipper, cable operated |
| Transmission: | 4 Speed | 6 Speed | 6 Speed |
| Final Drive: | Chain | Chain | O-ring chain |
| Frame: | Steel mono-backbone frame | Molybdenum steel with double cradle split above the exhaust port | Deltabox aluminium frame with revised rigidity balance |
| Front Suspension: | Upside down telescopic forks | Marzocchi hydraulic USD fork, 45 mm Ø | Fully adjustable 41 mm inverted cartridge fork, |
| Front Wheel Travel: | 100 mm / 3.9 in | 290 mm / 11.4 in | 115 mm / 4.5 in |
| Rear Suspension: | Dual shocks | Monoshock with progressive compound lever | Fully adjustable link Monocross; 4-way adjustable, |
| Rear Wheel Travel: | 104 mm / 4.1 in | 300 mm / 11.8 in | 119.4 mm / 4.7 in |
| Front Brakes: | Single 220 mm hydraulic disc with IMU-based ABS | Single 255 mm Ø disc, 2 floating piston calipers | 2x 310mm discs 4 piston calipers |
| Rear Brakes: | Single 190 mm hydraulic disc | Single 240 mm Ø disc, 1 floating piston caliper | Single 220mm disc 1 piston caliper |
| Front Tyre: | 120/80-12 65J | 90/90 -21 | 120/70 ZR17 |
| Rear Tyre: | 130/80-12 69J | 140/80 -18 | 180/55 ZR17 |
| Rake: | 25.0° | 26.5° | 24° |
| Trail: | 82 mm / 3.2 in | 108.5 mm / 4.3 in | 97 mm / 3.8 in |
| Dimensions: | Length 1710 mm / 67.3 in Width 755 mm / 29.7 in Height 1029 mm / 40.5 in | Length: 2270 mm / 89.4 in Width: 813 mm / 32.0 in Height: 1255 mm / 49.4 in | Length 2040mm / 80.3in Width 705mm / 27.8'in Height 1095mm / 43.1in |
| Wheelbase: | 1155 mm / 45.4 in | 1490 mm / 58.7 in | 1375 mm / 54.1 in |
| Seat Height: | 776 mm / 30.5 in | 940 mm / 37 in | 850 mm / 33.5 in |
| Ground Clearance: | 160 mm / 6.3 in | 320 mm / 12.6 in | 130 mm / 5.1 in |
| Fuel Capacity: | 5.6 Litres / 1.45 US gal | 8.5 L / 2.2 US gal | 17.5 Liters / 3.7 gal |