Honda CR 500R (1987) vs Honda XL 250R (1987)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | Honda |
| Model: | CR 500R | XL 250R |
| Years: | 1987 | 1987 |
| Engine: | Two stroke, single cylinder, membrane & power valve | Four stroke, single cylinder, SOHC, RFVC, 4 valve |
| Capacity: | 491.4 cc / 29.9 cu-in | 249 cc / 15.1 cu-in |
| Bore x Stroke: | 89.0 x 79.0 mm | 75 x 56.5 mm |
| Compression Ratio: | 6.8:1 | 10.2:1 |
| Cooling System: | Liquid cooled | Air cooled |
| Induction: | Single 38mm Keihin flat-slide carburettor | 2 x 24mm piston valve |
| Ignition: | CDI | Solid state CD |
| Starting: | Kick | Primary kick with automatic compression release |
| Max Power: | 64.6 hp / 47.5 kW @ 6000 rpm | 20.2 hp / 15 kW @ 7500rpm |
| Max Torque: | 72.2 Nm / 53.3 lb-ft @ 6000 rpm | 19.6 Nm / 14.5 lb ft @ 8000 rpm |
| Clutch: | Wet plate | Wet multi-plate |
| Transmission: | 5 Speed | 6 Speed |
| Final Drive: | Chain | Chain |
| Front Suspension: | 45mm Showa cartridge fork, compression damping, air pressure | Air assisted telescopic fork |
| Front Wheel Travel: | 305 mm / 12.0 in | 210 mm / 8.2 in |
| Rear Suspension: | Showa Prolink with adjustable compression rebound damping | Single shock, swing arm |
| Rear Wheel Travel: | 320 mm / 12.6 in | 109 mm / 4.2 in |
| Front Brakes: | 240mm Single disc hydraulic 2 piston caliper | Drum |
| Rear Brakes: | 220mm Single disc hydraulic 1 piston caliper | Drum |
| Front Tyre: | 80/100 -21 | 3.00 - 21 |
| Rear Tyre: | 110/100 -18 | 4.60 -17 |
| Wheelbase: | 1508.7 mm / 59.4 in | 1379 mm / 54.3 in |
| Seat Height: | 937 mm / 36.8 in | 856 mm / 33.7 in |
| Ground Clearance: | 315 mm / 12.4 in | 289 mm / 11.4 in |
| Dry Weight: | 105.6 kg / 233.0 lbs | 117 kg kg / 258 lbs |
| Fuel Capacity: | 8.3 Litres / 2.2 US gal | 10.5 Litres / 2.8 gal |