Honda CMX 250 Rebel (2010-12) vs Honda NC 700S / DCT (2014-15)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | Honda |
| Model: | CMX 250 Rebel | NC 700S / DCT |
| Years: | 2010-12 | 2014-15 |
| Engine: | Four stroke, parallel twin cylinder. SOHC. 2 valve per cylinder | Four stroke , Parallel twin, SOHC, 4 valves per cylinder |
| Capacity: | 234 cc / 14.3 cu-in | 745 cc / 45.4 cu-in |
| Bore x Stroke: | 53 x 53 mm | 77 x 80mm |
| Cooling System: | Air cooled | Liquid-cooled |
| Compression Ratio: | 9.2;1 | 10.7:1 |
| Induction: | Single 26mm diaphragm-type constant-velocity (CV) carburetor | PGM-FI electronic fuel injection |
| Ignition: | Digital CDI | Computer-controlled digital transistorised with electronic advance |
| Starting: | Electric | Electric |
| Max Power: | 18.5 hp / 13.5 kW @ 8250 rpm | 40.3 kW / 54 hp @ 6250 rpm |
| Max Torque: | 18.6 Nm / @ 5500 rpm | 68 Nm / 50.8 lb-ft@ 4750 rpm |
| Clutch: | Wet, cable operated | Wet Multiplate |
| Transmission: | 5 Speed | 6 Speed Manual |
| Final Drive: | Chain | Chain |
| Front Suspension: | 33mm Telescopic fork | 41 mm telescopic forks |
| Front Wheel Travel: | 117 mm / 4.6 in | 120 mm / 4.7 in |
| Rear Suspension: | Dual shocks with five-position spring preload adjustability | Single monoshock damper |
| Rear Wheel Travel: | 74 mm / 2.9 in | 120 mm / 4.7 in |
| Front Brakes: | Single 240mm discs 2 piston caliper | Single 320 mm hydraulic disc 3 piston calipers and sintered metal pads |
| Rear Brakes: | 230mm Drum | Single 240 mm hydraulic disc 1 piston caliper and sintered metal pads |
| Front Tyre: | 3.00 -18 | 120/70-ZR17 |
| Rear Tyre: | 130/90 -15 | 160/60-ZR17 |
| Rake: | 30° | 27˚ |
| Trail: | 113 mm / 4.4 in | 110 mm / 4.3 in |
| Wheelbase: | 1450 mm / 57.1 in | 1525 mm / 60.0 in |
| Seat Height: | 676 mm / 26.6 in | 790 mm / 31.1 in (Europe) - 775 mm / 30.5 in (Japan) |
| Fuel Capacity: | 10 Litres / 2.6 gal | 14.1 Litres / 3.7 US gal |