Honda CM 250T (1981) vs Honda CB 125 Disc (1981) vs KTM RC 250 (2014-15) vs Yamaha XTZ 250 Tènèrè (2011) vs Honda CB150R ExMotion (2018)

Comparison technical specifications

Add bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike
Make:	Honda	Honda	KTM	Yamaha	Honda
Model:	CM 250T	CB 125 Disc	RC 250	XTZ 250 Tènèrè	CB150R ExMotion
Years:	1981	1981	2014-15	2011	2018
Engine:	Four stroke, parallel twin, OHC, 2 valve per cylinder	Four stroke, single cylinder, OHC, 2 valve per cylinder	Four stroke, single cylinder. DOHC with finger followers, 4 Valve per cylinder	Four stroke, single cylinder. SOHC, 2 valve	Four stroke, single cylinder, DOHC, 4 valve
Capacity:	234	124 cc / 7.6 cu-in	248.8 cc / 15.2 cu-in	249 cc / 15.2 cu-in	149 cc / 9.0 cu-in
Cooling System:	Air cooled	Air cooled	Liquid Cooled	Air /oil cooled	Liquid cooled
Bore x Stroke:	53.0 x 53.0 mm	56.5 x 49.5 mm	72 x 61.1 mm	74.0 x 58.0mm	57.3 x 57.8 mm
Compression Ratio:	9.4:1	7.4:1	14.5:1	9.5: 1	11.3:1
Induction:		2x Keihin 22mm slide type manual choke	Bosch Injection	Injection	PGM-FI electronic fuel injection
Max Power:	17 hp @ 7500 rpm	17 hp / 12.4 kW @ 11500 rpm	31.8 hp / 23.7 KW @ 9000 rpm	21 hp / 15.3 kW @ 7500 rpm	16.8 hp / 12.5 kW @ 9000 rpm
Max Torque:		NA	24 Nm / 17.7 lb-ft @ 7250 rpm	21 Nm / 2.09 kgf-m @ 6500 rpm	13.7 Nm / 10.1 lb-ft @ 7000 rpm
Transmission:	4 Speed	5 Speed	6 Speed	5 Speed	6 Speed
Final Drive:	Chain	Chain	Chain 5/8 x 1/4” X‑Ring	Chain	O-ring sealed chain
Front Suspension:	31mm Forks, centre axle fork	Telescopic fork, 4.5 in wheel travel	WP Suspension Up Side Down	35mm telescopic fork	41mm Telescopic USD Fork
Rear Suspension:	Dual shocks adjustable spring preload	Swing arm, 2.6 in wheel travel	WP Monoshock	Swingarm w/rebound-adjustable single shock	Mono Shock Absorber
Front Tyre:	3.25-18	2.50 -18	95/75-R17	80/90 -21	110/70 – 17M
Rear Tyre:	110/90-16	2.75 -18	115/75-R17	120/80-18	150/60 – 17M
Fuel Capacity:	12.5 Litres	10 Litres / 10.6 US gal	10 Liters / 2.6 gal	16 Litres / 4.2 US gas	8.5 Litres / 2.2 US Gal