Triumph Rocket 3 GT 221 Special Edition (2022)
Comparison technical specifications
Add bike |
Remove bike |
| Make: | Triumph |
| Model: | Rocket 3 GT 221 Special Edition |
| Years: | 2022 |
| Engine: | Four stroke, inline 3-cylinder, DOHC |
| Capacity: | 2458 cc / 150 cub in |
| Bore x Stroke: | 110.2 x 85.9 mm |
| Cooling System: | Liquid cooled |
| Compression Ratio: | 10.8:1 |
| Induction: | Ride-by-Wire, fuel injected |
| Lubrication: | Wet sump |
| Exhaust: | Stainless 3-into-1 headers with 3 exit silencer / CAT box |
| Ignition: | Digital inductive type via electronic engine management |
| Starting: | Electric |
| Max Power: | 123 kW / 167 PS / 165 hp @ 6000 rpm |
| Max Torque: | 221 Nm / 163 ft-lb @ 4000 rpm |
| Clutch: | Wet, multi-plate hydraulically operated, torque assist |
| Transmission: | 6 Speed |
| Final Drive: | Shaft, bevel box |
| Frame: | Full aluminum frame |
| Swingarm: | Single-sided, cast aluminum |
| Front Suspension: | Showa 47mm upside-down 1+1 cartridge front forks, compression and rebound adjuster. |
| Front Wheel Travel: | 120 mm / 4.7 in |
| Rear Suspension: | Fully adjustable Showa piggyback reservoir RSU with remote hydraulic preload adjuster |
| Rear Wheel Travel: | 107 mm / 4.2 in |
| Front Brakes: | 2x 320 mm discs w/ Brembo M4.30 Stylema 4-piston radial monobloc calipers, Cornering ABS |
| Rear Brakes: | Single 300mm disc, Brembo M4.32 4-piston monobloc caliper, Cornering ABS |
| Front Wheel: | 17 x 3.5 in cast aluminium |
| Rear Wheel: | 16 x 7.5 in cast aluminium |
| Front Tyre: | 150/80 R17 V |
| Rear Tyre: | 240/50 R16 V |
| Rake: | 27.9° |
| Trail: | 134.9 mm / 5.3 in |
| Dimensions: | Width 886 mm / 34.8 in - Handlebars Height 1066 mm / 41.5 in - Without Mirrors |
| Wheelbase: | 1677 mm / 66 in |
| Seat Height: | 750 mm / 29.7 in |
| Dry Weight: | 294 kg / 648 lbs |
| Fuel Capacity: | 18 Litres / 4.7 US gal |