Aprilia Tuono V4 R (2012) technical specifications
Aprilia Tuono V4 R is produced in 2012. Engine is Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder, displacement 998.9 cc / 60.96 cu in , produces power 120.8 kW / 162 hp @ 11000 rpm and 110 Nm / 11.2 kgf-m / 81.1 lb-ft @ 9000 rpm. Aprilia Tuono V4 R top speed is 269.2 km/h / 167.3 mph. Aprilia Tuono V4 R weighs 179 kg / 395 lbs. Aprilia Tuono V4 R has 3 photos.
Technical specifications
+ Add to 'Compare list'Model: | Tuono V4 R |
Years: | 2012 |
Engine: | Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder |
Capacity: | 998.9 cc / 60.96 cu in |
Bore x Stroke: | 78 x 52.3 mm |
Compression Ratio: | 13.0:1 |
Cooling System: | Liquid cooled |
Induction: | Airbox with front dynamic air intakes. 4 Weber-Marelli Ø48 mm throttle bodies with 4 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Road) |
Ignition: | Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and "stick-coil" type coils Electric. |
Starting: | Electric |
Alternator: | Flywheel mounted 450W alternator with rare earth magnets |
Lubrication: | Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling) |
Exhaust: | 4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine management system controlled butterfly valve and integrated trivalent catalytic converter . Euro4 |
Max Power: | 120.8 kW / 162 hp @ 11000 rpm |
Max Torque: | 110 Nm / 11.2 kgf-m / 81.1 lb-ft @ 9000 rpm |
Clutch: | Multiplate wet clutch with mechanical slipper system |
Transmission: | 6 Speed |
Final Drive: | Chain |
Final Drive Ratio: | 42:16 (2,625) |
Gear Ratio: | 1st: 39:15 (2.600) / 2nd: 33:16 (2.063) / 3rd: 34:20 (1.700) / 4th: 32:22 (1,455) / 5th: 34:26 (1,308) / 6th: 33:27 (1,222) |
Steering angle: | 24.5° |
Trail: | 105 mm / 4.1 in |
Frame: | Aluminium dual beam chassis with pressed and cast sheet elements. Sachs steering damper. |
Front Suspension: | Sachs upside down front fork with Ø43 mm stanchions. Low profile forged aluminium caliper mountings for radial calipers. Completely adjustable spring preload and hydraulic compression and rebound damping. |
Front Wheel Travel: | 120 mm / 4.7 mm |
Rear Suspension: | Double braced aluminium swingarm; mixed low thickness and sheet casting technology. Sachs piggy back monoshock with completely adjustable: spring preload and hydraulic compression and rebound damping. APS progressive linkage. |
Rear Wheel Travel: | 130 mm / 5.1 in |
Front Brakes: | 2x Ø320 mm floating stainless steel discs with lightweight stainless steel rotor with 6 studs. Brembo radial calipers with 4 horizontally opposed Ø32 mm pistons. Sintered pads. Axial pump master cylinder and metal braided brake hoses. |
Rear Brakes: | Single Ø220 mm diameter disc, Brembo floating caliper with two Ø32 mm isolated pistons. Pump with integrated tank and metal braided hose |
Front Tyre: | 120/70 ZR17 |
Rear Tyre: | 190/55 ZR 17 (alternative: 190/50 ZR 17; 200/55 ZR 17) |
Dimensions: | Length: 2065 mm / 81.2 in Width: 800 mm / 31.4 in (at the handlebar) Height: 1090 mm / 42.9 in |
Ground Clearance: | 125 mm / 4.9 in |
Wheelbase: | 1435 mm / 56.8 in |
Seat Height: | 840 mm / 33.1 in |
Dry Weight: | 179 kg / 395 lbs |
Fuel Capacity: | 17 Litres / 4.5 US gal |
Fuel Reserve: | 4 Litres / 1.1 US gal |
Average Consumption: | 7 L/100 km / 14.3 km/l / 33.6 US mpg |
Standing ¼ Mile: | 10.8 sec |
Top Speed: | 269.2 km/h / 167.3 mph |
Back to Aprilia motorcycles