Technical specifications
|
| Model: |
Tuono V4 R |
| Years: |
2011 |
|
Engine:
|
Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder
|
|
Capacity:
|
998.9 cc / 60.96 cu in
|
|
Bore x Stroke:
|
78 x 52.3 mm
|
|
Compression Ratio:
|
13.0:1
|
|
Cooling System:
|
Liquid cooled
|
|
Induction:
|
Airbox with front dynamic air intakes. 4 Weber-Marelli Ø48 mm throttle bodies with 4 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Road)
|
|
Ignition:
|
Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and "stick-coil" type coils Electric.
|
|
Starting:
|
Electric
|
|
Alternator:
|
Flywheel mounted 450W alternator with rare earth magnets
|
|
Lubrication:
|
Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
|
|
Exhaust:
|
4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine management system controlled butterfly valve and integrated trivalent catalytic converter . Euro4
|
|
Max Power:
|
120.8 kW / 162 hp @ 11000 rpm
|
|
Max Torque:
|
110 Nm / 11.2 kgf-m / 81.1 lb-ft @ 9000 rpm
|
|
Clutch:
|
Multiplate wet clutch with mechanical slipper system
|
|
Transmission:
|
6 Speed
|
|
Final Drive:
|
Chain
|
|
Final Drive Ratio:
|
42:16 (2,625)
|
|
Gear Ratio:
|
1st: 39:15 (2.600) / 2nd: 33:16 (2.063) / 3rd: 34:20 (1.700) / 4th: 32:22 (1,455) / 5th: 34:26 (1,308) / 6th: 33:27 (1,222)
|
|
Steering angle:
|
24.5°
|
|
Trail:
|
105 mm / 4.1 in
|
|
Frame:
|
Aluminium dual beam chassis with pressed and cast sheet elements. Sachs steering damper.
|
|
Front Suspension:
|
Sachs upside down front fork with Ø43 mm stanchions. Low profile forged aluminium caliper mountings for radial calipers. Completely adjustable spring preload and hydraulic compression and rebound damping.
|
|
Front Wheel Travel:
|
120 mm / 4.7 mm
|
|
Rear Suspension:
|
Double braced aluminium swingarm; mixed low thickness and sheet casting technology. Sachs piggy back monoshock with completely adjustable: spring preload and hydraulic compression and rebound damping. APS progressive linkage.
|
|
Rear Wheel Travel:
|
130 mm / 5.1 in
|
|
Front Brakes:
|
2x Ø320 mm floating stainless steel discs with lightweight stainless steel rotor with 6 studs. Brembo radial calipers with 4 horizontally opposed Ø32 mm pistons. Sintered pads. Axial pump master cylinder and metal braided brake hoses.
|
|
Rear Brakes:
|
Single Ø220 mm diameter disc, Brembo floating caliper with two Ø32 mm isolated pistons. Pump with integrated tank and metal braided hose
|
|
Front Tyre:
|
120/70 ZR17
|
|
Rear Tyre:
|
190/55 ZR 17 (alternative: 190/50 ZR 17; 200/55 ZR 17)
|
|
Dimensions:
|
Length: 2065 mm / 81.2 in Width: 800 mm / 31.4 in (at the handlebar) Height: 1090 mm / 42.9 in
|
|
Ground Clearance:
|
125 mm / 4.9 in
|
|
Wheelbase:
|
1435 mm / 56.8 in
|
|
Seat Height:
|
840 mm / 33.1 in
|
|
Dry Weight:
|
179 kg / 395 lbs
|
|
Fuel Capacity:
|
17 Litres / 4.5 US gal
|
|
Fuel Reserve:
|
4 Litres / 1.1 US gal
|
|
Average Consumption:
|
7 L/100 km / 14.3 km/l / 33.6 US mpg
|
|
Standing ¼ Mile:
|
10.8 sec
|
|
Top Speed:
|
269.2 km/h / 167.3 mph
|